Wood effect paint from synthetic lacquer enamel that imitates the grains of the wood with a single layer. Easy to apply on all surfaces, even on non-porous or lacquered surfaces (doors, frames, cabinets, windows, electrical appliances, etc.)
Application:
Apply on a clean and dry surface, free of grease and dust. If the surface is non-porous, sand prior application. Use the correct type of primer depending on the surface of application. Allow it to adhere and dry well.
Stir well before use. Apply by a 7 to 8 cm brush without diluting the product.
Use long brush strokes in the desired direction to mark the veins, gently passing the tip of the brush in the form of continuous, parallel or slightly wavy in the same direction. If you want to mark the veins more, you can make some irregular cuts on the brush and proceed in the same way.
Drying time: 6-8 hours
Recoating time: 24 hours
Colors: Light walnut, Ash oak, Wenge and Walnut
