PureScape® BLRis a color reviver and protector for faded black limestone surfaces.
It forms a hard durable finish that reacts chemically with the substrate. The special design of different molecular weight polymers enables superior performance.
All stain resistant, water repellant and color enhancer which improves the overall visual appearance of the substrate.
A surface treated with PureScape® BLR will remain moisture vapor permeable and allow stains to be easily cleaned. It provides a color enhancement that improves the overall visual appearance of the substrate.
A single application provides a flat natural finish. An additional application can develop a sheen finish.
Does not form a film on the surface. Completely invisible once dry. UV resistant.
Eco-friendly formulation, biodegradable, low VOC, non hazardous, easy to apply.
Application:
Test before application on a small hidden area. Shake the container well before use.
Use neat, do not dilute.
Apply on a clean and dry surface, free from deust, dirt, oil, efflorescence, organic growth and old coating films. Apply by roller or a brush. Recommended application of two coats.
Recoating time 20minutes.
PureScape® BLR will not perform if applied over non-absorbent surfaces.
Substrate Temperature: +10°C to +25°C.
Avoid contact with water for 6 hours. Water repellence is evident after initial curing but may take up to 7 days to reach 100% efficiency.
Coverage:
Black Limestone: up to 30 m2/litre.
