PurePlastic revitalizes and protects aged plastic surfaces. Water based dispersion which protects
most faded and aged plastic surfaces from:
Food and drink staining,
Mild Alkali cleaners
Pollution & dirt contamination
Bird fouling
Vegetation, Algae, Lichen & Moss growth
A treated surface will remain easy to clean and maintain.
Invisible once dry, vapor permeable, non-hazardous and non-toxic water borne product.
Solvent and silicone-free, Fully biodegradable, UV-resistant.
Application:
Test before application on a small hidden area to determine the strength of solution required.
Shake well before use.
Use neat, without dilution.
Apply on a clean and dry surface free from oil, efflorescence, organic growth and old paint films.
Apply by low pressure spray and immediately buffing it dry with a soft clean cloth.
Clean tools and equipment immediately after use with water.
Avoid contact with water for 6 hours. Water repellence is evident after initial curing but may take up to 7 days to reach 100% efficiency.
All surfaces must be treated to saturation in a single application to ensure 100% product efficiency.
PurePlastic will not perform correctly if applied over non-absorbent surfaces.
Coverage:
8 – 16 m²/Litre