Acrylic solvent based enamel with exceptional adhesion on all types of metals and single-hand galvanized iron. High resistant to UV sunlight, weather conditions and corrosion. High level of hardness and flexibility. Especially recommended for painting galvanized metal sheet, aluminum, copper, iron, etc.
Application:
Stir the contents of the container well. Apply by brush to original viscosity. If applied by spray gun, adjust the viscosity with a suitable solvent thinner for a better application. Due to the characteristics of the product it is not recommended to apply by roller, since the application tends to be sticky.
Apply on a clean and dry surface, free of rust, grease and dust. Previously painted surfaces must be sanded well and cleaned thoroughly to ensure good adhesion. In case of slight rust, sand well to remove loose parts. If the surface is very rusty, it has to be neutralized using Jafep Rust Neutralizer.
For better protection apply one coat of Jafep Antioxidant Primer before applying BS Acrylic Enamel.
Drying time: 30 min
Recoating time: 24 hours
