Salt Neutralizer for Concrete & Stone. Powerful efflorescence remover that requires no neutralization after use.
Efficient in removing cement, concrete and mineral deposits by de-structuring cement and mineral deposits on all substrates. Capable of removing cement, concrete and mineral deposits on fragile substrates such as metal (including steel and aluminum), glass, rubber and gloss paints, without changing their appearance. Ideal for mineral substrates and does not change the surface porosity. Safe for the substrates as it does not damage glass, metal and plastic.
New eco-friendly formulation, far less hazardous than citric, hydrochloric and phosphoric acid based products. Unlike traditional acid products, it has less impact on the environment, it is user friendly, sustainable and safety compliant. Non corrosive, biodegradable.
Application:
Test before application on a small hidden area. Shake the container well before use.
PureKleen-SN is a concentrate and requires water to be added as appropriate.
1:1 heavy, 1:5 medium, 1:10 light.
Apply using a low pressure hand spray unit or brush. Allow the product act for 5 to 30 minutes . The time required varies depending on the size of the laitance and the thickness of the material deposits being re-moved.
Do not allow the applied product to dry.
Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise, brush off using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same time.
Avoid allowing the product to dry prior to rinsing.
Clean equipment with clean warm water.
To prevent future soiling, it is recommended to use Rocan PureScape
Do not dilute or mix with another product notably bleach.
Coverage: 10-20 m² / litre
