A clear coating for furniture, floors, inside drawers and food cabinets. Shellac has unusual adhesion to hard-to-grip surfaces. Hold out is exceptional on wood, plywood, and plaster. Recommended for spot sealing knot holes, sap streaks, and refilled areas before refinishing. Can also be used as a barrier coat over a silicone-contaminated area.
Advantages:
- Good adhesion to hard-to-grip surfaces
- Spot seal knot holes, sap streaks and refilled areas before refinishing
- Use as a barrier coat over a silicone contaminated area
- Net Wt. 12 oz.
Directions:
Shake well before use to ensure color uniformity. Hold the can 12 to 14 inches away from surface to be coated. Press spray button firmly. Use steady, even strokes. Several thin coats give a better finish than one heavy coat.
Finishing: Stain if desired. Seal with Sanding Sealer. Allow it to dry ½ hour before sanding. Apply topcoat. Allow it to dry ½ hour. Sand if needed. Apply second topcoat.
Repair: If repair is rough, seal and sand. Feather topcoat evenly.
