Mohawk Wiping Wood™ Stains are semi-transparent, pigment, solvent-based stains that are non-grain raising, fade resistant, easy to stir, soft-settling formulas. Only 30 minutes drying time is needed before a lacquer sealer coat can be sprayed. Apply by spray, brush or cloth. Pigmented Wiping Stains are easier to control because there’s less lapping. An ideal uniforming stain when applied over dye stains prior to sealing. A dark color tone is easily lightened with Wood Stain Reducer S-15.
This stain will never bleed through the finish. Virtually any finish can be applied over Wiping Wood™ Stain: lacquer, shellac, varnish, polyurethane, acrylics and many others.
Advantages:
- Application by spray, rag or brush
- Fade resistant, non-bleeding permanent colors
- Ultra fine ground pigments for maximum color yield
- Seal coat may be applied over stain after 30 minutes of dry time
Directions:
Stir well before use. Apply generously by wiping, brushing, or spraying. Allow to flash off momentarily, then use a clean absorbent cloth to remove excess. May be intermixed with other stains to create custom colors. Allow to dry for approximately 30 minutes before sealing or top coating.
