Produces a natural oil finish. Fast, easy, just wipe on -let penetrate – wipe dry. Polymerized wood finish, combines penetrating oils with resins to produce a natural oil finish on unfinished wood. Water spots, stains, burns and scratches are easily removed by buffing with 4/0 steel wool and Danish Oil.
Apply, let dwell to penetrate, and wipe off excess.
Advantages:
- One application seals and finishes wood
- Never gums up in warm temperatures
- Will not print
- Nongreasy
- Available in aerosol form for easy application
Directions:
Ready for use, no reduction or thinning is required. Apply only to new wood, previously oiled or stripped wood. Apply a generous amount of product by brushing, ragging or spraying. Surface should be kept “wet” for at least 30 minutes to insure penetration into wood pores. After 30 minutes, wipe dry and buff surface. If desired, a second coat may be applied for greater wood protection.
Depending on air circulation and temperature, Danish Oil can take 48 to 72 hours to dry completely to be suitable for use.
Apply Danish Oil to stained wood only after stain has dried a minimum of 24 hours.
Danish Oil should not be applied over lacquer or other finished surfaces.
