E-Z Vinyl® Sealer is designed for use in high contact areas where improved durability, water resistance, and adhesion are critical. A key advantage is improved system flexibility. When properly applied under Mohawk pre-catalyzed or post-catalyzed systems, the system passes and /or exceeds KCMA testing. No catalyst needed. Ready to spray viscosity. Solids: 25%.
Advantages:
- Ready to spray, no reduction necessary
- Good drying and leveling properties
- HAP’s compliant
- 275 VOC compliant
- Provides excellent tie coat adhesion
- Quick build up
- Recommended sealer for high moisture areas
- Available in a spray can for easy application
Directions:
Stir product thoroughly after opening and frequently throughout use. E-Z Vinyl® Sealer is manufactured at spray viscosity and should be applied in light, even coats of no more than 3-4 wet mils. If two coats are needed, sand the first coat aggressively with 220 grit sandpaper. Apply the second coat in a light, even coat of no more than 3-4 wet mils. Total film build of the entire system, including topcoats, should not exceed 4 dry mils. Excessive build may lead to poor adhesion, cracking or cold check problems.
