Wood Stain water based for interior and exterior application. It is very flexible and permeable to water vapor allowing the wood to breathe. Decorates and protects against extreme weather conditions and environmental factors. Contains filter additives that protect from UV radiation.
Ideal for all types of interior and exterior wood: fences, doors, frames, windows, etc., for a high quality, durable finish.
Application:
On new wood: Sand and apply on a clean, dust and grease free surface. It is recommended to apply one coat of Protective Fund for wood or Anti-woodworm prior Lasur.
Apply one coat of Lasur water based stain without dilution. Recoat if necessary, till you reach the desired result. Sand between coats.
On varnished wood: Sand gently and clean. Apply one or two coats undiluted. If the existing varnish is in a bad condition, remove entirely and proceed as new wood.
Note:
Tropical woods such as chestnut, oak, etc. are rich in tannins. It is recommended to clean them beforehand with a cloth soaked in non-greasy solvents such as acetone.
Resinous woods such as pine must be cleaned with greasy solvents such as white spirit.
Recoating time: 3 hours
Drying time: 30-45 minutes
