Nitrocellulose coatings are the preferred material for the piano and musical instrument industry because of its clarity and rubbing properties. Mohawk Piano Lacquer’s blended
formulation enhances these expectations by providing a harder more durable film that can be built to a full 7 dry mils and buffs to a higher sheen while maintaining excellent clarity.
Use Piano Lacquer where a heavier than normal film build is desired on surfaces intended to be polished to a high gloss. Piano Lacquer is ideal for high end finishes where high build and clarity are a must.
Advantages:
- Formulated for high build applications up to 7 dry mils
- Excellent rubbing clarity
- Conventional VOC formulation
- Ready to spray in high gloss 90 sheen
- Yields harder finish than Classic Instrument Lacquer for added durability
Directions:
Ready to use, no reduction is necessary. Stir well before use.
Seal with a full wet coat of E-Z Vinyl® Medium Solids Sealer, E-Z Vinyl® Sealer, Finisher’s Choice™ Clear Lacquer Sealer and allow to dry for 30-45 minutes. Sand thoroughly with 220-320 grit sandpaper, and remove dust before topcoat application. Apply even wet coats of Piano Lacquer up to 4 wet mils. Build to desired finish depth not to exceed 7 mils of dry film thickness. If sanding between coats is desired, use 240 or finer grit paper and remove dust before topcoating.
